STANDARD PUMP, INC. is the new standard in chemical transfer worldwide, with a focused attention to customer relations and product reliability. We manufacture the highest quality chemically resistant products for transferring corrosive acids and alkalizes to combustible solvents and petroleum products. Our worldwide network of distribution is supported through our production facility in Atlanta, Georgia (USA) and European headquarters in Munich, Bavaria (Germany).

DRUM PUMP MOTORS (ELECTRIC)

SP-280P

Thermally protected. Manual reset fro safety. Drop in cartridge brush system. Yellow Valox housing for chemical resistance. 115V Models - 16 ft. (5m) of SJT3 wire cord with molded plug. 220V Models - IP-44 enclosure, CE listed, Har Ho7 cable, 5M harmonized cord w/o plug.   Weight: 7.5 lbs. (3.4 kg) Maximum Specific Gravity: 1.8 Maximum Viscosity: 750 centipoise NOT SUITABLE FOR FLAMMABLE

SP-ENC

Thermally protected. Manual reset for safety. Drop in cartridge brush system. Blue anodized housing for use in highly corrosive applications or where high levels of fumes are present. 115V models- 16 ft (5m) of SJT3 wire cord with molded plug. 220V models- IP-54 enclosure, CE listed, Har H07 cable, 5 M harmonized cord w/o plug.   Weight: 9.0 lbs Maximum Specific Gravity: 1.8 Maximum Viscosity: 750 centipoise NOT SUITABLE FOR FLAMMABLE

DRUM PUMP MOTOR (PNEUMATIC)

SP-ENC

100 psi maximum inlet pressure. Air consumption 22 SCFM at 92 psi. 1/8" air connection. Air line filter, pressure regulator and automatic oiler recommended. External muffler.   Weight: 2.5 lbs. (1 kg) Maximum Specific Gravity: 1.75 Maximum Viscosity: 250 centipoise RPM: 7500

SP-A2

100 psi maximum inlet pressure. Air consumption 28 SCFM at 90 psi. 3/8" air connection. Air line filter, pressure regulator and automatic oiler recommended. External muffler. Plastisol coated handle for operator comfort and safety. Weight: 3 lbs. (1.3 kg) Maximum Specific Gravity: 1.75 Maximum Viscosity: 450 centipoise RPM: 8000

DRUM & CONTAINER PUMP ENDS

Pump ends are designed with threaded joints for easy maintenance and individual component replacement, without special tools. Our guide sleeves are TFE®, with a specially extruded fin which secures it inside the inner tube. We utilize a seal grade carbon for our lower bushing (Pure Carbon® 6038C), the most chemically resistant carbon available. Our shafts are SS-316 (SS ends) and Hastelloy® C-276 (PP, PVDF). Materials of construction include non-glass filled PP, natural PVDF and SS-316. These high quality materials and state of the art techniques ensure that we are THE STANDARD IN CHEMICAL TRANSFER

SP-PVDF

	PVDF SP-PVDF-27" (700 mm) carboys SP-PVDF-39" (1000 mm) 55 gal. (200 l. drums) SP-PVDF-47" (1200 mm) tanks
	APPLICATIONS Highly corrosive and fuming materials. Hydrofluoric Acid (concentrated cold), Nitric Acid (concentrated), Propionic Acid, Stearic Acid, Sulfuric Acid (66 Baume) and many other liquids.

SP-SS

	SS SP-SS-27" (700 mm) carboys SP-SS-39" (1000 mm) 55 gal. (200 l. drums) SP-SS-47" (1200 mm) tanks SP-SS-60" (1500 mm) IBC's SP-SS-72" (1800 mm) large storage vessels
	APPLICATIONS Flammable or combustible materials. Diesel, gas, oils, solvents, alcohol's. See our compatibility chart for other liquids.

SP-PP

	PP SP-PP-27" (700 mm) carboys SP-PP-39" (1000 mm) 55 gal. (200 l. drums) SP-PP-47" (1200 mm) tanks SP-PP-60" (1500 mm) IBC's SP-PP-72" (1800 mm) large storage vessels
	APPLICATIONS Acid and alkalis. Acetic acid, Ammonium Hydroxide, Ferric Chloride, Fluosilic Acid, Phosphoric Acid (45%), Nitric Acid (20%), Sodium Hydroxide, Sulfuric Acid (75%) and many other liquids.